CountyComm GP-5, Руководство по эксплуатации, Страница: 12 / 17

12
SETTING THE CLOCK
1. Long press the [TIME] button until you see the hour flashing. Rotate the [TUNING] knob to
set the correct hour, then quickly press the [TIME] button and notice the minutes are flashing.
2. While it's flashing turn the [TUNING] knob to set the correct minutes, then press [TIME].
SETTING THE ALARM TIME
1. Long press the [ALARM] button until both the HOUR & AL flashing, rotate the [TUNING]
knob to adjust the hour, then quickly press [ALARM] with the minutes flashing.
2. Rotate the [TUNING] knob to adjust the minutes and quickly press the [ALARM] button with
the " " symbol flashing.
3. Rotate the [TUNING] knob to select 1 ~ 90 minutes to set the Auto Alarm Off Timer.
4. Quickly press the [ALARM] button to confirm and notice " " shows on display to activate
the alarm by radio.
5. To turn off the alarm function, repeat quickly pressing the [ALARM] button and notice "
" disappear.
Setting the alarm to wake with the radio on
1. Turn on the radio, tune into your favorite alarm radio station. Please set the volume at the
noticeable level.
2. quickly press [MEM.] button and notice the PRESET number flashing in the upper right
corner of the display.
2. While it flashing, press the [ALARM] button and notice " " symbol is flashing for couple
seconds. Now this alarm radio station is set.
TURNING OFF THE ALARM
When the radio is turned on by the alarm function with radio, you can quickly press [POWER]
button to continue listening radio afterwards.
Quickly press [POWER] again to turn off the radio.
DISPLAY MODE
With radio OFF: Quickly press the [DISPLAY] button to view Temperature and Alarm time.
With radio ON: Quickly press the [DISPLAY] button to view Alarm time, Temperature, Local
time, signal strength/ SNR.