IMPORTANT: To avoid damage to your table:
- Before storing, drain all water that may have accumulated in or around patio furniture
frames. If not drained properly, water can cause damage.
- When storing patio furniture, do not stack anything on glass, stone, or marble tabletops.
- A patio furniture cover is also recommended.
- For safety reasons, do not sit or stand on the table.
3/3
3.
Using the Hex wrench, attach the leg connector bracket to each table leg by Nut(M6) with metal
washer into each hole on the connector bracket and table leg (fig. 3). DO NOT TIGHTEN COMPLETELY.
4.
Tighten all bolts and nuts with the Hex Wrench.
Cover all bolts with the plastic bolt and nut caps provided.
5.
Turn the table to the uprig ht position.
Keep touch-up paint for future use for both your table and chairs.
Your table is now ready for use.
fig. 3
ASSEMBLY INSTRUCTIONS
Identify all parts packed in the carton against the parts list. Remove all protective materials. Place parts on a nonabrasive
surface. If you have any questions, please call our Customer Service Center at 866-538-7735, (fax: 952-946-0031),
Monday-Friday, 9:00 a.m.-5:00 p.m. CST, e-mail: [email protected] or visit our website at www.homecasual.net.
1.
Place the table top upside down on a flat, soft surface (fig. 1).
(WARNING: Placing it on a hard surface will scratch the tabletop.)
2.
Turn the table legs upside down. Align the table legs with the tabletop. Using the Hex Wrench, secure each table
leg to the table top by inserting a bolt (M6x15mm) and Lock washer and
metal washer through each hole on the table legs
into each hole on the table top (fig. 2). DO NOT TIGHTEN COMPLETELY.
fig. 1
fig. 2
Made in CHINA
Didtributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
For questions or comments about product:
Email: [email protected] or Call toll-free: 866-538-7735
Please refer to part numbers when reordering
sears. com
