background image

INSTALLATION REQUIREMENTS FOR AUSTRALIA

WARNING: THE APPLIANCE AND FLUE-SYSTEM SHALL BE INSTALLED IN ACCORDANCE WITH AS/
NZS 2918 AND THE APPROPRIATE REQUIREMENTS OF THE RELEVANT BUILDING CODE OR CODES.

WARNING: APPLIANCES INSTALLED IN ACCORDANCE WITH THIS STANDARD SHALL COMPLY WITH 
THE REQUIREMENTS OF AS/NZS 4013 WHERE REQUIRED BY THE REGULATORY AUTHORITY, i.e. 
THE APPLIANCE SHALL BE IDENTAFIABLE BY A COMPLIANCE PLATE WITH THE MARKING “TEST-
ED TO AS/NZS 4013.”

ANY MODIFICATION OF THE APPLIANCE THAT HAS NOT BEEN APPROVED IN WRITING BY THE 
TESTING QUTHORITY IS CONSIDERED TO BE IN BREACH OF THE APPROVAL GRANTED FOR COM-
PLIANCE WITH AS/NZS 4013.

CAUTION: MIXING OF APPLIANCE OR FLUE-SYSTEM COMPONENTS FROM DIFFERENT SOURCES OR 
MODIFYING THE DIMENSIONAL SPECIFICATIONS OF COMPONENTS MAY RESULT IN HAZARDOUS CON-
DITIONS. WHERE SUCH ACTION IS CONSIDERED, THE MANUFACTURER SHOULD BE CONSULTED IN 
THE FIRST INSTANCE.

CAUTION: CRACKED AND BROKEN COMPONENTS, e.g. GLASS PANELS OR CERAMIC TILES, MAY REN-
DER THE INSTALLATION UNSAFE.

OPERATING AND MAINTENANCE INSTRUCTIONS:

1.  WARNING: ANY MODIFICATION OF THE APPLIANCE OR FLUE SYSTEM THAT HAS NOT BEEN AP-

PROVED IN WRITING BY THE TESTING AUTHORITY IS CONSIDERED AS BREACHING AS/NZS 4013.

2.  WARNING: DO NOT USE FLAMMABLE LIQUIDS OR AEROSOLS TO START OR REKINDLE THE FIRE.

3.  WARNING: DO NOT USE FLAMMABLE LIQUIDS OR AEROSOLS IN THE VICINITY OF THIS APPLIANCE 

WHEN IT IS OPERATING.

4.  WARNING: DO NOT STORE FUEL WITHIN HEATER INSTALLATION CLEARANCES.

5.  WARNING: OPEN AIR CONTROL (AND DAMPER WHEN FITTED) BEFORE OPE NING FIRING DOOR

6.  CAUTION: THIS APPLIANCE SHOULD NOT BE OPERATED WITH A CRACKED GLASS.

7.  CAUTION: THIS APPLIANCE SHOULD BE MAINTAINED AND OPERATED AT ALL TIMED IN ACCOR-

DANCE WITH THESE INSTRUCTIONS.

8.  CAUTION: THE USE OF SOME TYPES OF PRESERVATIVE-TREATED WOOD AS A FUEL CAN BE HAZ-

ARDOUS.

Appendix A

Australian Installation Instructions

Содержание 2200iA

























Отзывы: