5
24.
DO NOT USE MOWER WHEN GRASS
IS WET OR SLIPPERY.
25.
THIS MACHINE IS NOT MEANT FOR
HIGHWAY OR STREET USE.
It is not
a recreational vehicle and it should not
be operated as such.
26.
ALWAYS DISENGAGE THE MOWER
BLADE CLUTCH
when transporting.
27.
KEEP ALL SAFETY LABELS IN
LEGIBLE CONDITION.
Remove
grease, dirt, grass, etc. that may cover
safety labels. Replace any safety label
that is missing or damaged.
28.
WEAR PERSONAL PROTECTIVE
EQUIPMENT.
Eye, ear, feet and head
protection is recommended.
29.
ONLY USE COUNTRY CLIPPER
APPROVED ACCESSORIES.
30.
DO NOT CHANGE THE ENGINE
GOVERNOR SETTING
or over speed
the engine.
31.
BEWARE OF MOWER DISCHARGE
DIRECTION
and do not point it at
anyone.
32.
DO NOT OPERATE THE MOWER
UNDER THE INFLUENCE OF
ALCOHOL OR DRUGS.
33.
USE CARE WHEN LOADING OR
UNLOADING MACHINE INTO A
TRAILER OR TRUCK.
34.
USE CARE WHEN APPROACHING
BLIND CORNERS,
shrubs, trees, or
other objects that may obscure vision.
35.
CLEAN ALL GRASS AND DEBRIS
FROM MACHINE TO PREVENT
FIRES.
Remove spilled oil or gasoline.
36.
KEEP HANDS AND FEET AWAY
FROM MOVING PARTS.
If possible do
not make adjustments with the engine
running.
37.
NEVER MOW WHEN OTHER PEOPLE
OR PETS ARE IN THE AREA.
38.
CAREFULLY RELEASE PRESSURE
FROM COMPONENTS WITH STORED
ENERGY.
39.
USE CARE WHEN REPLACING
BLADES.
Wrap the blade(s) or wear
gloves, and use caution when servicing
them. Only replace blade(s). Never
straighten or weld blade(s).
40.
USE JACK STANDS TO SUPPORT
COMPONENTS
when required.
SAFETY INTERLOCK SYSTEM
Your
Country Clipper
Zero Turn Radius Mower
is equipped with switches interlocked for your
safety.
ON JOYSTICK MODELS
GROUND DRIVE
NEUTRAL IS WHEN THE JOYSTICK (CONTROL
LEVER) IS IN THE
“DOWN”
POSITION.
1.
The mower blades must be disengaged
and the Control Lever(s) must be in the
neutral position before the engine will
start.
2.
The engine will stop if the mower blade
clutch is engaged when the operator
leaves the driver’s seat.
3.
The engine will stop if the Control
Lever(s) are not in the neutral position
when the operator leaves the driver’s
seat.
4.
The engine will stop if the brake is
“SET”
and the Control Lever(s) are not
in the neutral position.
5.
The engine will stop if the brake is
“SET”
and the mower blade clutch is
engaged.
DO NOT OPERATE MOWER IF SAFETY
SWITCHES AND GUARDS ARE NOT
OPERATING PROPERLY