manualshive.com logo in svg

Count KF-200, Руководство пользователя, Страница: 18 / 27

Поделиться
Скачать
Count KF-200 Скачать руководство пользователя страница 18

18 

 

MICRO ADJUSTING THE FOLD POSITION

  

It is very important to understand the relationship of the fold offset versus the crease offset.  
When folding a creased stock the nature of the creased paper when folded is to follow the 
crease.  If possible, adjust the crease before micro adjusting the crease.   

 

If you wish to move the position of the fold relative to the lead edge you would need to adjust 
the position of the crease and not necessarily the position of the fold.  If you still feel you need 
to adjust the fold press the adjust button from the run screen.  You can micro adjust each fold 
by pressing the arrow keys each direction.  Each press will adjust by 1/10th of a mm. Each 
adjustment is relative to the one before it so if you adjust fold 1 by 3 clicks it will also move fold 
2 as well in the same direction. To keep the subsequent folds in their same locations you would 
then need to adjust them each back the number of clicks you adjusted the previous location, in 
this case 3 clicks. 

 

 

REPEAT LAST JOB 

Press the repeat last job button to go directly to the run screen and repeat the last job fold 
settings. 

BI-PASS MODE 

Press the Bi-Pass mode button to enter Bi-Pass mode. This mode will allow paper to flow directly 
through the folding unit without folding the stocks.  For some lighter stocks the knob setting 
must be set to the highest setting to allow for clearance of the exit roller. 

 

Содержание KF-200




























Отзывы:

Нет отзывов