Coto baby SALSA PRO, Руководство пользователя, Страница: 23 / 52

GB
16
INSTALLATION
Placing child in the Salsa Q pro seat
Note!
After you have done the installation, check it by trying to move it, it shouldn’t
move more than an inch at either side, if it does, tighten the straps or try installing it
again. The belts should never be twisted. If you are unable to click the tongue sections
into the buckle, unlock the buckle by pressing the red button and try again.
Installation for group II / III
This installation method is for a child within Group (15-25 kg)and Group II (15-25 kg)
and Group III (22-36 kg).
Note: the Salsa Q pro must be used Isofix anchors plus top tether at the same
time with 3-point automatic seat belt for group.
a) Remove the harness system, including the belt pads, central buckle and crotch
strap.
b) Adjust the headrest by pulling the lifting handle at your required position
according to your child ’ s height.
c) Place your child into the car seat.
d) Thread the vehicle's shoulder belt from the Groupbelt guide slot (F14-a), or
Group(F14-b), and thread the lap belt into the belt guide hole (F14-c).So the
installation is completed (F14-d).
e) Joint the belts and buckle up.