FG1088-AW(1S)SP
Installation
1. Unpack the box and check for the following items:
a. Main telephone body
b. Base support unit
c. Cordless Handset
d. Power Adaptor c/w power cord
e. Line cord
.
2. Connect one end of the line cord to the telephone RJ11 socket and the other end to the
wall telephone outlet.
3. Install the faceplate (delivered separately) onto the telephone.
4. Connect the power adaptor to the wall power outlet and the other end to the phone
power socket
Operation
A. Initiating a Call
Using the cordless handset
1. Lift the handset from the cradle
2. Press the “On” button to get a line
3. Listen to the dial tone
4. Press the desired number or press a memory button for autodial
5. During a call, press the “On” button to activate the hands-free function
6. To drop the call temporarily and make another call, press the flash button
7. To end the call, place the handset back on the cradle or press the “Off” button
Using the base unit speakerphone
1. Press speaker button. The red LED indicates that the speaker is active
2. Listen to the dial tone
3. Press the desired number or press a memory button for autodial
4. To drop the call temporarily and make another call, press the flash button
5. To end the call, press the speakerphone button again. The LED will go off
B. Answering a Call
An audible ringing sound and the flashing LED indicates and incoming call
Using the handset
1. Lift the cordless handset and press the “On” button to answer the call.
2. To end the call, either place the cordless handset back on the cradle/ or press the “Off” button.
Using the base unit speakerphone
1. Press the speakerphone button to answer the call.
2. To end the call, simply press the speakerphone button again. The line status LED will turn off.
