Cotech JD2837, Инструкция по эксплуатации

Страница: 8 / 44

8
EN
GL
IS
H
3 1 2
On/Off
Switching on: Press the On/Off
trigger (1).
Switching off: Release the trigger.
• To lock the power trigger (1)
in the on position:
Press the lock button (2) and
trigger simultaneously (1)
releasing the trigger (1) before
the lock button (2).
• Press only the power trigger (1)
and release it to turn it off.
Setting the speed
The speed is adjusted by the speed control (3), even during operation. After cutting
for an extended time at low speed the motor should be run at max. speed for about
3 minutes to cool down the motor.
Setting the pendulum motion
The adjustable pendulum motion can be adapted to the workpiece material being
sawn. When the saw blade moves outwards the workpiece is lifted simultaneously
increasing both debris removal and cooling of the workpiece.
0.
Sheet metal, steel or rubber
I. Non-ferrous metals, hardwood, plastic
II. Wood
III. Wood (highest removal rate)