5
Switch control
How to use
1
Ensure the blanket is fitted to the bed
correctly.
2
Plug the power lead into the closest
socket, using an extension lead if
needed to ensure that the lead is not
stretched.
Preheating the bed
1
Move the heat setting on the control
switch to heat level 2 or 3, depending on
the level of the heat required. Allow
approximately 60-90 minutes for the
blanket to heat the bed thoroughly,
although this time may vary depending
on the room temperature and type of
bedding used.
All night use
1
Move the heat setting on the control
switch to heat level 1.
• This setting will provide safe and
comfortable heat to sleep on all night.
• This setting can be used to air the bed.
WARNING: Always ensure that the
heat setting is moved to the OFF
position when you get up the next day,
or after airing the bed.
Braille markings
•
Braille markings are located on the back
of the switch to help identify the
direction of the heat level in the dark, or
if visually impaired.
• The highest heat level
pre-heat
is identified by 3 raised nodules
mid level
by 2 raised nodules
low level
(all night) by 1 raised nodule
Features
⁄
Illuminated heat setting light
(To identify heat levels in the dark)
¤
Heat levels 2 & 3
(Used to pre-heat)
‹
Heat level 1
(Safe & comfortable to sleep all night)
›
Braille markings
(located on the back of the switch)
fi
Off position
¤
›
⁄
‹
fi
S3 Rev 2 21/7/04 1:52 PM Page 5
