Installation Instructions
Assemble two short boards (P2)
and one long board (P1), then
connected by screws (S1).
Insert the bottom board (P3) into
the assemble boards.
Insert elght hand grips (P6) cover
into the bars.
Make sure that all hand grips ane
tightened.
Insert the last long board (P1)
right to the position, and then
tighten with screws(S1).
Place the supporting bar (P5)
right to the holes of the board
until it reaches the bottom. Insert
the rod into the supporting bar
through the holes.
Install four legs (P4A P4B) into
short boards and screw it.
04
