www.costway.com
19
www.costway.com
The inclination of the awning is set by adjusting the screw
C
1
a
b
Step2:
K
eep holding up the arm(C
1
)
by your hand
and
adjust the
screw(3)
How to adjust the awning inclination
WARNING:when adjusting the awning inclination, please expand the awning completely
1
2
3
If you turn the screw in the direction
of arrow a, the angle of the awning
will go down.
If you turn the screw in the direction
of arrow b, the angle of the awning
will rise upward.
Step1:Hold up the arm and loosen the screw
（
1&2
）
Don't loosen the screw directly without hold
ing
the arm
up.
Step
3:Don't forget to tighten the screws(1&2)
after adjust
ing
the
inclination
of the awning.
If you d
on
't tighten the screw(1&2), the screw 3 will
be d
a
maged
soon
.
After adjusting the screw3, please check if the
awning has been adjusted to the proper angle,if
not,please repeat the above installation steps
2
until the angle is suitable.
hold up arm
20
When we fully unfold the awning, we may find that the left and
right sides of the awning are unbalanced.
At this time, we need to adjust the inclination of the
awning so that the left and right sides of the awning can
be on the same horizontal line.
Tips:You can adjust only the left side or only the right
side, you can also adjust both left side and right side. The
inclination of the awning is
up to
you, but please
remember the left side and right side should be on the
same horizontal line finally.
