04
05
PRODUCT ASSEMBLY
PRODUCT ASSEMBLY
IMPORTANT: Do not tighten completely until
assembly is completed.
STEP1
Attach the seat slat (C) to the arm (B) by bolts (D)
with washers (F) through the pre-drilled holes on the
arm into the pre-welded nuts on the seat slat.
Repeat step for the other side arm(B).
STEP2
Attach the back (A) to the arm (B) by inserting bolts
(E) with washers (F) through the pre-drilled holes on
the arm into the pre-welded nuts on the back.
Repeat step for the other side arm(B).
B
B
C
C
F
D
A
A
B
F
E
