CAUTION:
> To avoid personal injury, always flip the popcorn maker away from you to
avoid escaping steam. Place the popcorn-filled lid on a clean, flat surface.
> Lift the Popcorn Maker's base slightly away from you to allow the steam to
escape.
> Wait at least 10 to 20 seconds to ensure popping has completely stopped
before flipping the popcorn maker as remaining heat may still have effect on
the un-popped corns.
> Extreme caution must be used when unloading popcorn, always place the
unit on a counter top to prevent burns from residual oil or water running out.
WARNING:
> After popping, the base is HOT! Grasp handle only. Use caution to avoid
burns.
9. Serve popcorn from the clear lid or empty into a large serving bowl.
10. Sprinkle fresh popped popcorn with salt or other seasonings, if desired.
To make additional batches of popcorn
1. Empty the fresh popped corn into a serving bowl.
2. Allow popcorn maker base to cool completely.
3. Continue popping another batch of popcorn following the operation
instructions (to use your popcorn maker) previously described.
USE MAINTENANCE INSTRUCTIONS
• This appliance requires little maintenance. It contains no user serviceable
parts.
• Do not try to repair it yourself. Any servicing requiring disassembly other
than cleaning must be performed by a qualified appliance repair technician.
CARE AND CLEANING
CAUTION:
Never immerse the popcorn maker base, cord or plug in water or
other liquid.
1. Unplug popcorn maker and allow to cool before cleaning.
2. The popcorn maker should be cleaned after each use.
3. Wash the clear popcorn maker lid, plastic lid cap in warm, soapy water.
Use a soft cloth or kitchen sponge, rinse and dry thoroughly.
WARNING:
To prevent scratching, never use abrasive scouring pads, steel
wool or scouring powders.
4. After consistent use, the non-stick finish may discolor. To remove
discoloration, use a soft cloth saturated with lemon juice or vinegar and apply
to the finish.
CAUTION:
Never place the Popcorn Maker's clear lid, plastic lid cap, in the
dishwasher.
STORAGE
1. Unplug unit and allow it to cool.
2. Store the clean popcorn maker fully assembled.
3. Snap the lid cap in place.
4. Place the clear popcorn maker lid onto the base. Make sure the lid handles
and the base handles are aligned. Store the popcorn maker in its box or in a
clean, dry place.
08
09
