04
05
10. Note: When the foot bath basin without water or works to water
shortage, water shortage warning light will be lit, please add
water in time.
Operating instructions:
Maintenance & Storage
1. Please check whether the product is damaged before the first
time use
2. Plug the power cord into the power outlet to ensure that the
outlet voltage is consistent with the nominal value of the product;
3. Gently press the water tank, the water tank can pop out
products, screw off the water tank cover, fill with water, screw on
the cover and gently press into the water tank installation tank,
water will automatically into the steam foot Bath Tub;
4. Press the standby button to power on, and then press the power
off button again
5. But after the foot bath into the default mode of work, mid-range
temperature, work for 10 minutes;
6. Short press the temperature key to choose the corresponding low
temperature, medium temperature, high temperature three gear;
7. Short press the timing key to choose the corresponding 10
minutes and 20 minutes two timing gear;
8. After power-on, the steam is discharged from the steam outlet in
the basin. The user can adjust the temperature and the time of
foot bath according to his needs
9. After use, please open the drain plug, put the residual water in
the foot bath, draw out the water box, empty the residual water
in the box, keep the steam foot bath clean, for the next use.
1. Unplug the plug before cleaning;
2. Wipe the shell of the product with a damp towel and dry it with a
soft cloth
3. Do not use corrosive cleaning fluid for cleaning
4. Do not immerse the product in water or other liquids
5. When not in use, please put the product into the packing box and
place it in a safe, dry, well-ventilated and cool place
Foot pedal
Operating interface
Outer Shell
Water storage tank
Water tank installation tank
Basin box
Standby key
Three-stage key
Two-stage timing key
Water shortage warning lamp
NOTED:
Technical data: 120V
6
0Hz 300W
