CLEANING AND MAINTENANCE
ATTENTION:
Please shut off the unit and unplug from the mains before
cleaning or performing any maintenance.
CLEANING THE SURFACE
Clean the plastic housing with a duster or a soft wet cloth.
Do not use chemical solvents (such as benzene, alcohol or gasoline) as they
may cause irreversible damage. Make sure no water enters the control panel.
CLEANING THE WATER TANK
Unplug the power cord and remove the honeycomb filter bracket. With a
cloth (dipped in a mild detergent), wipe the water tank. Before using the unit,
the tank should be rinsed by filling the tank and allowing it to drain through
the drain port.
Draining the water reservoir and refilling with fresh water at least once a
week will help reduce any mineral deposits and keep the filters clean.
Do not run the unit in Humidify mode with stale water in the tank.
We recommend emptying the tank and refilling it with fresh water if water
has been standing in the tank for an extended period of time.
MAINTAINING AND CHANGING THE HONEYCOMB
FILTER PADS
The appliance is supplied with Honeycomb cooling / filters pads. The
cleaning frequency for the Honeycomb filter depends on local air and water
conditions. In areas where the mineral content of water is high (hard water),
mineral deposits may build up on the honeycomb cooling filter and restrict air
flow. If mineral deposits remain on the Honeycomb pads, the filter should be
removed and washed under fresh water. For a deeper clean a mild detergent
should be used with a soft brush. Once cleaned the filter should be rinsed in
clean water before leaving to dry.
We recommend cleaning the honeycomb filter at least every two months,
depending on your needs.
11
Содержание ES10011US-WH
Страница 15: ......