8
Cleaning and maintenance
1. When you use this product at the first time after opening the package, it should be connected to power supplies, turn on
to the hot air function and let the machine run for around 10 minutes to dry the machine.
2. When this product is not used for a long time or used in wet season, before you use it, it should be connected to power
supplies, turn on to the hot air function and let the machine run for around 10 minutes to dry the machine.
3. When the air outlet of the main engine of this product is accidentally filled with water, you should unplug the power cord
quickly, turn the main engine upside down and shake it gently to let the water drain out, and place the main engine in a
dry place for 24 hours to dry the residual attached water
.
4. When this product is not used for a long time, you should check the air outlet above and the air inlet below the main
engine to make sure whether they are blocked by clothes, dust or clothing flocs. If so, you should clean
by brush or vacuum cleaner and then start the machine and let it work for 3 minutes and blow out the debris.
5. When you clean the stains on the product appearance, wipe the product with a soft and clean cloth
;
when more stubborn
stains need to be removed, be sure to use mild detergent. Do not use medical diluted alcohol
,
otherwise it may damage
this product or erase the marks on the product
6. Place the machine in a ventilated place after using this product to avoid the mold having moisture odor or mildew due to
humidity
;
If you find the mold is dyed or has residual stains
,
please clean and dry before use; If the machine is not used
for a long time, please clean and store the mold in time.
7.
This product can not be used across functions because it is designed for the functions of quick drying clothes and clothing
care, so it can not replace the heater, hair dryer, purifier and other products.
:
Please be sure to remove the power plug from the power socket, wait for the machine to cool down
completely before cleaning and maintenance to avoid electric shock and injury
.
Caution
Failure Causes Analysis:
1. Machine does not work after it turns on.
(1)
. Make sure whether the device is plugged in?
(
2
)
. Please pull off the plug and plug it in again.
(3)
. Make sure whether the knob is rotated at the “ten minutes”place.
2.
The drying effect of the machine is not good
(1)
.Make sure whether the air outlet is covered?
(
2
)
.Adjust the drying time again
(3)
.Make sure the garment pattern or clothing is smooth without adhesion and overlap
(4)
.Ma
k
e sur
e w
hether th
e m
achine in
l
et and out
l
et ar
e bl
oc
k
ed
?
P
l
ease open the zipper o
f t
h
e g
ar
m
ent pattern
, c
hec
k w
hether the parts ar
e bl
oc
k
e
d b
y c
l
othes
, d
ust or
c
l
othin
g fl
ocs
, cl
ean the
m a
nd try it a
g
ain.
Reminder: After the knob switch is activated, it is normal for the machine to start with a 2S delay, because the internal parts
of the blower need limited time to accelerate to the normal speed.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU .
T
o prevent possible harm to the environment or human health from uncontrolled waste disposal , recycle it responsibly to
promote the sustainable reuse of material resources .
T
o return your used device , please use the return and collection
systems or contact the retailer where the product was purchased . They can take this product for environmental safe recycling.
Содержание EP25006US
