10
The fan will not start.
interior
Repeat for each blade.Any measurement deviation should be within 1/8 in.
Check this level by selecting a point on the ceiling above the tip of ine of the blades.
Most fan wobble problems are caused when blade levels are unequal.
Measure from a point on the center of each blade to the point on the ceiling.Measure this distance.
Check that all blades and bladearm screws are secure.
Rotate the fan until the next blade is positioned for measurement.
Run the fan for ten minutes.if the fan continues to wobble please contact Customer Service and a
balancing kit will be sent to you.
