PRODUCT OVERVIEW
Letter
Details
A
Carry handle
B
Thermostat
knob
C
Power switch
D
E
Feet
ASSEMBLY
WARNING: Do not operate the radiator without the feet attached. ONLY operate
the radiator in the upright position, as use in any other position could cause a
hazard.
1. Turn the heater upside down for
ease of assembly (Fig B-1).
2. Put the feet into the correct position
as shown (Fig B-2 and Fig B-3).
3. Place the heater back into an upright position so it is ready for operation (the
carry handle is on the side of the appliance) (Fig B-4).
4. Allow to stand for one hour, once assembly is complete, before using the
radiator.
OPERATING INSTRUCTIONS
•
placed in the upright position.
•
Select an indoor location for the radiator, away from electrical cords, drapes
and other furnishings. Do not place the heater directly beneath an electrical
•
Set all of the controls to the “OFF” position and insert the plug into a power
•
Rotate the thermostat clockwise to the middle position.
•
Press the power switch “ON” for heat output.
•
When your room reaches the desired temperature, the radiator will
automatically turn off. The thermostat can be left at this setting.
•
As soon as the room temperature drops below the set temperature, the unit
will switch itself on automatically and then stay on until the set temperature
has been reached again.
Note: This method enables the room temperature to remain constant, while
being the most economical use of electricity.
A
B
C
D
E
