04
05
1.Place the anti-tumble
shelf into the rear of the
body.
2.Insert the rear wheel axle
through washer,wheel,
plastic ring into the
body,tighten using a cotter
pin.
3.Assemble the two front
wheels,insert the plastic
ring,wheel and washer,
tighten using two cotter
pins.
1
、
Car Body 1PC
2.Steering wheel 1PC
3.Backrest 1PC
4.Wheel 4PCS
5.Wheel Cap 4PCS
6.Anti-tumble Shelf 1PC
8.J-shaped Stick 1PC
9.Rear Wheel Axle 1PC
10
、
Ring 4PCS
11.Washer 5PCS
(1 replacement piece)
12.Cotter Pin 4PSC
(1 replacement piece)
7.Warning light 1PC
7.Insert the backrest over the
hole in the rear of the body,be
certain the backrest is
completely seated.
6.Loosen the bolt and nut in the
steering wheel first,then place the
steering wheel over the J-shaped
stick,insert the bolt and tighten the
nut with a screwdriver.
8. Connect the two wire plugs first,
then insert the whole warning light
into the car body.
Trun over the car body,and find the battery
house. Loosen the screws with a screwdriver.
Put 2 AA batteries in the battery house,then
tight the screw with a screwdriver.
5.Install the J-shaped stick at the
assigned location as picture.
4.Place the four wheel caps onto
the four wheels.
8
