ASSEMBLY
TO ASSEMBLE PLAYARD
Playard
Mattress
Fig. 1
Fig. 2
ATTENTION:
Playard must be fully assembled and securely locked before
installing or using other accessories.
1)
• Unzip bag and remove Playard frame
(Fig. 1). Undo the Fasten straps and set the
Mattress aside.
DO NOT
push center down yet.
2)
• Top rails must be fully locked before lowering center. Pull up one rail at a
time, hold one hand on each side of the rail and pull up sharply, do not pull
from the middle where the center latch release is located, make sure both
tubes latch in place and each rail is rigid (Fig. 2).
IMPORTANT:
The center must be raised while locking the rails. If one rail will
lock but the other side will not then, unlock the rail by squeezing the release
in the center and try again.
6
