Costway 81362479, Руководство пользователя

Страница: 6 / 9

www.costway.com
FIG. 7 FIG. 8 FIG. 9
Step 7: Fasten the brake cable with the plastic buckle on the frame. (As shown in FIG. 7)
Step 8: Clamp the plastic buckles at the front ends of the seat plate on the support tube of the frame,
and then lock it with a Torx knob and Torx screws. (As shown in FIG.7 & FIG.8)
Step 9: Clamp the two plastic buckles behind the seat plate on the support tube of the frame. (As
shown in FIG. 9)
Step 10: Install the hanging bag on the frame and stick it with Velcro. (As shown in FIG. 8)
Check after installation:
1. Whether the arm-supported walker is installed correctly and whether the four legs are flat,
please refer to the manual diagram for comparison.
2. Verify that all the accessories of the arm-type walking aid are fully assembled, and you can
check for extra accessories.
3. Check whether there is any looseness in the installation of the arm-type walker. If there is any
looseness, tighten the screws and nuts.
4. Check the appearance of all components of the arm-type walker for skew, and make appropri-
ate adjustments.
06