Costway 21458036, Руководство пользователя

Страница: 8 / 12

www.costway.com
Step 6:
6.1 As shown in Figure 1, insert the hexagonal bar into the table leg B until
the buckle is not visible.
6.2 Assemble the other end of the connecting rod to the table leg A and screw
on the handle. The handle does not need to be tightened. Note: As shown in
Figure 2 below, it needs to be aligned with the card slot.
6.3 Pull the connecting rod with the handle to the bottom end of the table leg
A in the direction of the arrow as follows.
6.4 Tighten the handle and install the M4 screws.M4 screws use the
supplied screwdriver .
6.5 Connect the power cord and motor of the power supply and
handest as shown in the figure.
N
3
I
3
I
2
I
1
K
On the
card slot
Tightened
08