Costco 781893, Инструкция по эксплуатации, Страница: 8 / 33

150112 E7
ANCHORING TO GROUND ASSEMBLY
(There are 2 ways to attach this canopy to the ground)
Option 1: Assemble on grass or dirt. Secure the canopy to
the ground by inserting 8 ground stakes (S) through each
base plate (K).
Then, tie the Olefin strap (T) to each corner of the canopy
roof (M) and secure to the 4 remaining ground stakes (S).
Option 2: Assemble on concrete. A drill, ½ inch drill bit
and adjustable wrench (not included) are needed for this
option. Secure the canopy to the concrete surface using
the 8 expansion bolts (V). Mark the location on each
base plate (K) where you will need to drill into the
concrete. Move the base plate then drill a hole the same
length as the expansion bolts (V).
Replace the base plate (K) and secure using expansion
bolts (V).
AWNING ASSEMBLY
Attach awning arms (F) to the posts (C1) using bolts (H). See diagram below.
Connect fabric fasteners on the roof (M) with the fabric fasteners on the side panels (N, O).