Charging the Worklights while Detached from the Base using USB Charging Cable (included).
Both Worklights (5) are equipped with internal rechargeable Lithium ion batteries and may be charged independently while
they are removed from the base.
1.
Remove the Worklight
(5)
by grasping the Worklight Bracket
(9)
firmly and sliding it from the Carriage Track
(15).
2.
Lift the Charging Cable Compartment Dust Cover
(C)
and swing it open to expose the USB Charging Cable and Plug
(11).
Insert the USB Charging Plug
(11)
into the USB Port of a desktop, laptop, or any enabled USB accessory power port such
as a power bank.
3.
The Worklight Charging Status LED
(14)
illuminates RED (appears below the surface) during charging and turns to
GREEN when the Worklight internal battery becomes fully charged.
OPERATING INSTRUCTIONS
Main Power ON/OFF Worklight
-
Spotlight Mode.
By pressing the Main Power ON/OFF Button
(1),
the unit can be set to perform the following functions:
Press the Main Power ON/OFF Button
(1)
once, the Spotlight
(4)
and the Worklights
(5)
will illuminate in High Intensity.
Press the Power ON/OFF Button
(1)
for the 2nd time, the Spotlight
(4)
and Worklights
(5)
will illuminate in Low Intensity.
Press the Power ON/OFF Button
(1)
for the 3rd time, the Spotlight
(4)
will turn OFF and Worklights
(5)
stay illuminated.
Press the Power ON/OFF Button
(1)
for the 4th time, the Worklight
(5)
will turn OFF.
Worklight Dedicated Power ON/OFF.
Each Worklight is equipped with a dedicated Power ON/OFF Button
(12).
Each Worklight can be operated independently while
attached to the base or detached from the base.
To adjust the Spotlight Head (4) Up and Down.
Turn the Base Adjustable Locking Knobs
(6) Counter clockwise to UNLOCK.
Adjust the Spotlight head
(4)
to the desired angle within 75°.
Turn the Base Adjustable Locking Knobs
(6)
Clockwise to LOCK.
Page 6 of 10
12
12
5
9
11
75°
14
6
6
C
