6
2.2.3
Installing the Casters to the Head and Foot Boards
1.
Insert the shaft of the caster into the caster socket of each bed leg. Ensure the
stem is fully inserted into the socket.
2.
To prevent excess movement of the bed during assembly, lock the casters by
pushing down on the caster lock.
3.
To unlock the casters, pull up on the caster lock.
2.2.4
Installing the Head and Foot Boards
1.
Stand the headboard section as close to the head frame as possible. Ensure the
board and frame are paired correctly using the label on the boards.
2.
Lift the head frame and hook the rivets onto the head board. Do not place your
hand between the frame and the head board when joining the two pieces
together.
3.
Repeat the previous steps for foot board installation.
4.
Insert a clevis pin through the hole between the two rivets at each corner to
securely lock the frame and bed ends together. Secure the pin with an R-clip.
