10
Part 1 - Introduction
1
RJ-45 Service Ports
These are PoE-enabled RJ-45 ports. Connect a network camera to one of these ports.
Model
Port Number
CRIS12
1 - 8
CRIS28
1 - 24
• PD network cameras will receive power over the signal line, without the use of an external
power source.
• Each port is enabled with Auto-MDI/MDI-X detection.
• The ports operate in different modes based on the network speed. (10/100Mbps: full/half
duplex, 1000Mbps: full duplex)
2
RJ-45 Service Port LEDs
These LEDs indicate the status of the RJ-45 service ports. The LEDs are mapped sequentially
with port numbers from left to right.
Model
Port LEDs
CRIS12
2
1
...
3
2
1
...
3
CRIS28
2
1
...
3
2
1
...
3
• The LED color indicates connection and communications speeds with the connected device.
• Each LED indicates LNK/ACT or PoE status based on the position of the PoE LED button.
