background image

6

Product Features

This camera is an IP-based network camera that 
compresses and transmits video over ethernet. 
You can use the INIT program to change network 
camera settings or the iNEX Basic program to manage 
multiple network cameras. In addition, the embedded 
web server (WebGuard) lets you remotely view live 
video or scan recorded video using a web browser. In 
addition, you can use the INEX Basic to manage network 
cameras and view/record video.

In this operation manual, the term 

Remote System

 

refers to the computer on which the remote program 
(INEX Basic or WebGuard) is running.

 

Supports DirectNET mode working with a DirectNET™ 
NVR that allows users to simply set up all required 
configurations without a PC

 

Supports ONVIF protocol (Core specification version 
2.4.0, Profile S)

 

Multi-streaming for high-resolution and high-quality 
video monitoring and simultaneous recording in real-
time as well as flexible configurations for those

 

Supports H.265 and H.264 video compression and 
M-JPEG still image compression algorithms

 

Supports 4-stage video compression rate and 
multiple compression resolutions

 

Two-way audio communication support for remote 
audio dialog

 

Video stream buffering to counter pre-/post-event 
buffering and network delays for improved network 
recording reliability

 

Remote monitoring via web browser or remote 
software

 

Automatic web casting code (HTML) generation

 

Up to 10 simultaneous remote monitoring 
connections

 

IP filtering, HTTPS, SSL, IEEE 802.1X, and configurable 
user authority levels for greater security

 

Network bandwidth limitation and MAT features for 
more efficient use of network bandwidth

Part 1 – Introduction

Содержание CDI5510VIFWH
























Отзывы: