Cosori CO172-EK, Руководство пользователя

Страница: 8 / 32

8
EN
Figure 1.1
Figure 1.2
Figure 1.3
BEFORE FIRST USE
Water Test
Perform the Water Test before using your
kettle to make sure it’s working properly.
Do
not drink the water that is boiled during this
initial test.
1. Remove all parts from the package and
carefully inspect each part.
2. Completely unravel the power cable
and place the power base on a flat, level
surface.
3. Press the Lid Release Button to open
the lid. [
Figure 1.1
]
4. Fill the kettle with water to the “ MAX ”
line, then close the lid. [
Figure 1.2
]
Place the kettle onto the power base.
Plug in.
5. Press the On/Off Switch . The blue
indicator light will turn on. [
Figure 1.3
]
6. The kettle will automatically turn off
once it has finished boiling the water.
Allow it to cool for at least 5 minutes,
then pour out the water.
Do not use the kettle if it is damaged.
Contact Customer Support to
replace your kettle (see page 11).
CAUTION!