7
DISPLAY
BEFORE FIRST USE
Setting Up
Controls
Sounds
1.
Remove all packaging from your dehydrator and its accessories. Make sure all package
contents are included (see page 3).
2.
Clean the base and trays with a moistened cloth.
NOTE:
The trays can be washed in the top rack of a dishwasher
only
if you remove them
before the drying cycle starts.
Do not
wash the base, cover, mesh screen, or fruit roll sheet in
a dishwasher.
Do not
immerse the base in water.
3.
Place the dehydrator base on a solid, level surface. Plug in. Stack the drying trays on top of
the base.
4.
Run the dehydrator for 30 minutes at any temperature, without adding any food. Make
sure that the room has sufficient ventilation, in case the dehydrator produces any smoke or
smells. This is normal.
5.
Rinse the trays in water. Dry all parts.
NOTE:
You only need to do this the first time you use the dehydrator.
• To start or stop the dehydrator, press
START/STOP
.
• To change the temperature, press
TEMP/TIME
once, then press
+
or
-
.
• To change the time, press
TEMP/TIME
a second time, then press
+
or
-
.
• To turn sounds on/off, wait for the display to show “
--:--
”, then press and hold
+
for 5
seconds until the dehydrator beeps 1 time.
