17
GAS SUPPLY REQUIREMENTS
WARNING
Failure to do so can result in death, explosion or fire.
Observe all governing codes and ordinances.
IMPORTANT:
This installation must conform with all local codes and
ordinances. In the absence of local codes, installation must conform with
American National Standard, National Fuel Gas Code ANSI Z223.1 - latest
edition or CAN/CGA B149 - latest edition.
IMPORTANT:
Leak testing of the range must be conducted according to the
manufacturer's instructions.
TYPE OF GAS
Natural Gas:
This range is design-certified by CSA International for use with natural gas or,
after proper conversion, for use with LP gas.
•
licensed heating personnel
•
authorized gas company personnel
•
authorized service personnel
•
This range is factory-set for use with Natural gas. The model/serial rating
plate located on the right side oven door trim has information on the
types of gas that can be used. If the types of gas listed do not include the
type of gas available, check with the local gas supplier.
Explosion Hazard
Use a new CSA International approved gas supply line.
Install a shut-off valve.
Securely tighten all gas connections.
If connected to LP, have a qualified person make sure gas pressure does
not exceed the maximum pressure listed in this section.
Examples of a qualified person include:
