14
15
1 ”A” is shelf limit pin
2 ”B” is shelf Sliding wooden shelf installation and
taking instruction:
Shelf taking: According to below instruction
drawing to pull out the shelf to support bracket 1
, press two sides of sliding roller buckles and pull
out the shelf following the arrow mark 2 .
REVERSIBILITY OF THE DOOR
Warning
:
To avoid accidents during the process of changing the door, we recommend that
you get assistance. The glass door is heavy and may cause injury if dropped.
- Depending on to the model and the type of handle your wine cabinet is
equipped with, you may have to rotate the door through 180 degrees.
- Depending on the type of handle your wine cabinet is equipped with, the door
may not be reversible or may require that a left or right opening door be ordered
to change the opening side.
1.Decorative nail
2.M4 six angle screwdriver
3.M4 door limit screw
4. Pincer
5.Door core
6. Slot type screwdriver
7. Upper door hinge
8.Lower door hinge
9. M5 six angle screwdriver
10.lower door hinge
11. Knife
1
1
1
11
2
2
2
3
3
4
4
5
5
6
6
7
10
8
8
9
9
3
4
ADJUSTABLE WOODEN SHELVES
Adjusting removing the shelves
For easy access to the storage content, you must pull the shelves approximately
1/3 of its depth out of the rail compartment. These wine cabinets, however, are
designed with a notch on each side of the shelf tracks to prevent bottles from
falling.
When removing any of these shelves out of the rail compartment, tilt the shelf
as per the diagram and simply pull out, or push in the shelf until it sits on the
support brackets securely.
Shelf installation and removal
instruction:
According to below instruction drawing to
press one side of shelf limit pin
1
, extract and
remove the shelf from the other side of support
bracket
2
, then take off the shelf following the
arrow mark
3
, Shelf installation will be opposite
with shelf removal.
