Copyright Cosmo Connected
–
All rights reserved 2018
USER’S GUIDE
Cosmo Bike by Cosmo Connected is a removable light that can be attached to a helmet or a bike seat and connected to a mobile application. The functions include position lighting
(continuous), indicator lights, warning lights and deceleration lights when installed under the seat. The device associates visual safety, fall detection and emergency warnings (via SMS and/or
email).
MINIMAL SETUP REQUIRED
Cosmo Bike adapts to most bike helmets available on the market.
To be able to enjoy all the features, you must have a next generation smartphone such as: IOS (Apple): Version 10 or higher
Android: Version 5 or higher
IOS & Android: GSM + GPS + Bluetooth smart 4 SIM
To connect your Cosmo Bike to your smartphone you must download the application and not use the Bluetooth in your settings.
ON/OFF Once charged, you can begin using your Cosmo Bike. To turn it on, you just tap the end of the case twice. You can switch off the Cosmo Bike in 2 ways: by the application, or by the
remote control with a long press of 5 seconds on the middle button. After a 2 minutes of total inactivity, the Cosmo Bike will automatically turn off. You can download the user guide on our
BEFORE THE 1ST USE
COSMO BIKE
1. Remove the base of your Cosmo Bike. The USB port is at the back of the Cosmo Bike.
2. Plug your Cosmo Bike in using the micro-USB cable that comes with it. The Cosmo turns on and gradually turns off. The recharge indicator LED (red light on the left side) stays on until fully
charged.
3. Unplug and then activate (tap the side twice: The Cosmo turns on)
MOBILE APP
1. Download the app from the Apple Store or Google Play Store and then start the app*
2.
Go to the “my Cosmo” menu to select your device (Note: only connects through the app; not
through the phone Bluetooth settings).
3. Once the device has connected, an update is suggested. Accept the update.
4.
Set up the desired attachment mode (“helmet” or “seat”)
*
Once installed, open the Cosmo Bike app and follow the instructions to create an account. If you already have one, enter your ID and password to log in. You can also create an account at our
site cosmoconnected.com. The Cosmo Connected app is free as is creating an account where you can add 3 emergency contacts to be notified by SMS and/or email if an incident is detected
by your Cosmo Bike.
MAIN FUNCTIONS Indicator lights / Fall detection and warning lights* / Position lights / Deceleration lights**. These light modes can be manually enabled/disabled via the mobile app and/or via
the remote control (optional accessory).
* The use of warning lights is regulated in each country; you must observe the laws in effect.
**The “deceleration” light mode is not enabled when the Cosmo Bike is attached to a helmet for visual comfort.
WIRELESS TECHNOLOGY The Cosmo Bike is equipped with a Bluetooth 4.0 transmitter-receiver. (Low energy). Transmitter power: -8.4 dBm/frequency bandwidth: 2400 to 2483.5 EIRP
maximum = -8.4 dBm
BATTERY The Cosmo Bike is equipped with a 900 mAh battery that can be recharged with a 5 V micro-USB (included). A fully charged battery lasts around 220 minutes (3 hr 40 min.). The
battery autonomy is 8 hours with continuous lighting (may vary based on the use).
EN
