Cosen SH-710LDM, Инструкция по эксплуатации

Страница: 45 / 127

4 ‐ 11
No Item Function Description
5
Projection lamp
ON/OFF
Press this button to turn on the projection lamp.
A beam of light will be projected on the work
piece for alignment.
A solid yellow light bulb icon indicates the lamp
has been turned on.
The projection lamp automatically turns off
in 90 seconds to prolong light bulb lifetime.
6
Last cut function
ON/OFF
When the mode is selected, the blade will
automatically stop and the hydraulic system will
shut down (in 10 seconds) after the current cut is
finished.
7
Coolant ON/OFF Press this button to turn on the coolant pump.
A solid yellow faucet icon indicates the coolant
pump has been turned on.
Press again to turn off the coolant pump.
Under cutting mode, a started blade will
also start the coolant.
Under setting mode, the user can turn on
the coolant and use it to wash off chips
accumulated on the machine.
8
SLOW/FAST swivel
mode
When the slow swivel mode is turned on, the
swivel speed will dramatically reduce to help the
machine finely position to the mitering angle.
Used only when under setting mode.
9
System parameter
setting
Press this button to set up system parameters.
Password is required.
All parameters have been set up by the
manufacturer. In order to prevent random
change from being made to these parameters
and affect cutting precision and machine life, this
function is protected with a set of password.
10
Cutting program
setting
Press this button to display cutting ‐ related
information e.g. blade speed.
Information and parameter setups for optional
accessories such as blade deviation detector can
also be configured in this setup page.