Cosen SH-5542, Инструкция по эксплуатации

Страница: 25 / 100

3 ‐ 3
LIFTING
When moving the machine, we strongly suggest you choose any one of the methods described below
to move your machine.
1. Use a crane
Move the machine to its location by using a crane and a wire rope sling that can fully withstand the
weight of the machine (refer to machine specification under Section 2 Specification ).

Machine lifting is likely to damage the machine
if not performed properly.
You must have a qualified crane operator to
perform the job.

You must use tools and equipment with the
proper tensile strength and use proper method
when moving your machine.

Apply the wire rope sling to the lifting hooks on
the four ends of the machine. Refer to
Illustration: Lifting Points for exact locations.

Slowly lift the machine. Be sure to protect the
machine from impact or shock during this
procedure. Also watch out your own fingers
and feet to avoid injuries.

Keep the machine well balanced during lifting
process and make sure the wire rope does not
interfere with the saw frame.

When you work together with more than two
people, it is best to keep constant verbal
communication with each other.