Cosen SH-460M Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 96

Cosen SH-460M Скачать руководство пользователя страница 3

NOTE:



Read this instruction manual carefully to familiarize yourself with the installation,
operation and maintenance of your COSEN bandsaw machine.



Operate the machine following the procedures described in the manual to prevent
personal injuries or machine damage.



Keep this manual handy and refer to it whenever you are uncertain of how to
perform any of the procedures.



For technical support or parts purchase, please contact your nearest COSEN
representative or our service center:

For Europe:
email: [email protected]
phone: +31-77-7600280
fax: +31-77-7600288
web: www.cosensaws.eu

For Taiwan and other countries:
email: [email protected]
phone: +886-3-5332143
fax: +886-3-5348324
web: www.cosen.com.tw

For US, Mexico, and Canada:
email: [email protected].
phone: +1-704-943-1030
toll free: +1-877-SAWING1
fax: +1-704-943-1031
web: www.cosensaws.com

For China:
email: [email protected]
phone: +86-152-50127815
web: www.cosensaws.cn

Instruction Manual:

SH-460M

Semi-Automatic Miter Cutting Bandsaw

Ver.5 2018 /01/08

©

2013 by COSEN MECHATRONICS CO., LTD.

No part of this publication may be photocopied or otherwise reproduced without the prior written
permission of COSEN.

Printed in Taiwan

FROM THE MANUFACTURER

Thank you for your purchase of COSEN’s bandsaw machine and your trust in the COSEN
brand.

We are excited to have you as our valued customer and look forward as much as you do to
the accelerated productivity, long-lasting endurance and superb cost-effectiveness this
machine is about to bring to you.

To ensure you are fully utilizing our machine and being advantaged in every possible way,
please do take your time and read through this instruction manual.

Any comment or suggestion in making our service better, please do not hesitate to let us
know. Thank you again!

«
1
2
3
4
5
...
»

Содержание SH-460M

































































































Отзывы:

Нет отзывов