Cosen C-420NC, Инструкция по эксплуатации

Страница: 43 / 138

4 ‐ 11
No Item Function Description
12
System parameter
setting
Press this button to set up system parameters. Password is
required.
All parameters have been set up by the manufacturer.
In order to prevent random change from being made to
these parameters and affect cutting precision and machine
life, this function is protected with a set of password.
13
Cutting program setting
Press this button to directly enter the cutting job program
setup page.
A total of 100 cutting programs can be set.
14
Cutting parameter
setting
Press this button to display cutting ‐ related information e.g.
total number of cuts completed and feeding length OR to set
parameters e.g. cutting lengths and quantity. (A total of 100
cutting programs can be set.)
Blade deviation detector (optional) can be also configured in
this setup page.
Refer to Cutting Display & Setup in the following page.
15
Material cutting
reference
This reference chart lists out the required blade speed and
cutting rate for each different material.
16
PLC monitor Shows current PLC signals.
17
Error report Lists a historical report of the errors and the time of
occurrence as well as provides troubleshooting support.
18
Saw blade up indicator Indicates that the saw blade is rising.
When activated, the saw blade icon will turn solid white.
19
Saw blade down
indicator
Indicates that a cut is completed and the saw blade is at its
lowest position.
When the blade completes each cut and triggers the lower
limit switch, the saw blade icon will turn solid white.
20
Rear vise status
indicator
Indicates if the rear vises have clamped and secured the
workpiece.
When the rear vises have secured the workpiece, the
clamping vise icon on the right will turn solid white.