30
31
To Adjust Top
Anchorage Strap:
Loosen top anchorage
strap into “loops” at
adjuster slide as shown
above.
To tighten top anchorage
strap: Pull on free end
(A)
of top anchorage strap
while holding hook
(B)
.
To loosen top anchorage
strap: Pull on lower top
anchorage strap
(C)
while
holding adjusting slide
(D)
with your other hand.
Pull on free end of top
anchorage strap until the
“loops” are flush against
the adjuster. Reattach hook
to anchor to check fit,
repeat steps if necessary.
To Attach Top
Anchorage Strap:
Put
knee in child restraint and
push down; attach hook to
anchor in vehicle to
estimate how much
adjustment you need, then
unhook.
Tighten
Loosen
WARNING
!
You must follow the threading diagram
exactly. Failure to follow these steps could
cause the strap to loosen in a crash, which
can result in serious injury or death.
A
B
C
D
B
Belt-Positioning Booster Use
Lap/Shoulder Belt
Belt-P
ositioning Booster Use:
30-80 lbs.
(14-36 kg),
29-52” (73-132 cm),
Ov
er 1 y
ear of age
.
Refer to the Weight and
Height Chart to make
sure your child is at the
proper weight and
height to use the belt-
positioning booster.
WARNING
!
Loose LATCH hooks can result in serious
injury or death.
Do not use LATCH or
tether strap when using
the Belt-Positioning
Booster.
You MUST fasten the
LATCH belt hooks
together behind seat.
When your child is
over 40 lbs. (18 kg) or
40” (102 cm) and over
1 year old, you must
remove the harness and
the base and use this
child restraint as a belt-
positioning booster.
4358-3188 Singles 12/31/03 9:35 AM Page 33
