Cosco 4131A, Руководство пользователя

Страница: 12 / 19

11
Body fat operation
a. When treadmill in ready status, Press “MODE” continually into body fat test.
b. Gender setting: 0 means Man, 1 means Woman.
Bottom left window will twinkle and show 0 or 1, or last setting gender, press “ +/-“ to choose man or
women, then press “ENTER” to set weight.
c. Weight setting:(25-200KG),
Bottom left window will twinkle and show 45kg or last setting weight, press “+/-“ to choose your
weight .Press “ENTER” to set height.
d. Height setting :(100-220CM)
Bottom left window will twinkle and show 145 (CM) or last setting height, Press “+/-“ to choose your
Height. Press “ENTER” to set age.
e. Age setting: (8-65),
Bottom left window will twinkle and show 18 or last setting age, Press “+/-“ to choose your age.
Press “ENTER” to set body fat test.
f. After all setting, The LCD will twinkle and then hold both of your hands on the hand pulse to test
your body fat. The LCD will show your body fat when test is finished.
g. Press “STOP” or “BODY FAT” to exit.
h. Taking Asian measure: body fat under 19 is thin; between 19 and 24 is realistic weight; between 24
and 27 is overweight; over 27 is obese.
Customized program setting:
The users can preset the speed, time and record them in the
computer for future use, according to their own needs. There’re 5 sets of user settings and 16 programs
per set in this computer.
1. Customized program select : Press Mode continually, when bottom right PROGRAM window
twinkle and show “u01”. At the same time, TIME and INCLINE window continually twinkle, that mean
you had select customized program1.Press “+/-“, bottom right PROGRAM window will shows u01-u05
accordingly.
LCD will show the data corresponding if customized program been setting.
Press START enter this program status, it will back to ready status if this program no setting.
Press ENTER enter into this program setting.
2. Customized program setting:
(1) Time setting
TIME window twinkle, if this program no setting, the initial time is 16 minutes. Otherwise it shows set
time. Press “+/-“to change program running time (The scale is 10-59 minutes.), press ENTER to start
speed and incline setting of section.
(2) Speed and incline setting
a. The dot matrix of section 1 in the LCD starts to blink, meaning it’s OK to start setting. If this program
is unidentified, the initial speed is 1km/h; the initial incline is 0. Otherwise it shows set speed and
incline.
Press “speed+ “, “speed-“to choose the speed you want.
Press “ “, “incline-“to choose the incline you want.
Press ENTER after setting, and start next section speed and incline setting.
b. Do the same to set the speed and incline of section 2-16. When the last section is finished identified