40
41
Removing Seat Pad for Cleaning
Remove harness as
described in the “Belt-
Positioning Booster”
section.
If your child restraint has
armrests,
pull armrest
covers off armrests and pull
through hole in back of
shell.
Remove the 6 harness
guides (shown in red) by
pushing down on one edge
with one hand and pulling
out from the front side
with the other.
From underneath bottom
of shell, release the elastic
straps shown in red.
2
3
Pull pad off shell.
Clean with warm sudsy
water, rinse clean and air
dry. Do not use bleach or
other harsh cleaners.
4
Replace seat pad by reversing order; lay pad on shell,
replace all harness guides, turn shell over to expose the
back, rehook elastic straps, and replace armrest covers.
Rethread harness (see belt-positioning booster section).
1