Cosasco RBS, Руководство по обслуживанию

Страница: 7 / 46

Cosasco
®
RBS/RBSA Retriever Maintenance Work Instruction P/N: 741031revH
Scheduled Review Date: July 2018 Page: 7 of 46
Date: 26/06/2017
Note: Please ensure you have the latest revision of this document by downloading it from our website or by contacting Cosasco Customer Service.
3 SAFETY WARNINGS
1. Safe operation requires two experienced and competent operators.
2. Do not use this retrieval equipment unless you have been trained and are competent
in its safe operation.
3. If it has been longer than 90 days since your last operation, you should review the
work instruction and complete an operation on a pressurized test rig.
4. Ensure all Retrieval Equipment is in good working order and has been tested in line
with Section 6.1 of this work instruction
5. Make sure you have complied with all plant safety requirements and environmental
regulations.
6. Identify the type of media its pressure and temperature. Review material safety data
information on the media prior to operation.
7. Ensure you have all the required safety equipment for the given media, "i.e. hard hat,
safety glasses, protective clothing, safety gloves, respirator, spill safety equipment,
etc...
8. Any actions which could vary system pressure such as surges caused by opening and
closing of valves and chokes must be delayed until completion of retrieval operations.
9. Insure you have enough clearance for safe operation. Note wind direction prior to
starting operations involving hazardous products.
10. Warning: Surface temperature may be hot. Contact may cause burn.
11. Warning: Do not exceed equipment specified pressure rating. Over-pressurization can
cause equipment to fail/burst posing a variety of safety hazards.
12. Warning: Be sure to introduce pressure gradually into the tooling by opening the
appropriate valve slowly. This safety measure is taken to prevent pistoning.
UNCONTROLLED PISTONING MAY CAUSE SERIOUS INJURY OR DEATH!
13. Warning: Do not apply a load of more than 150 pounds, perpendicular to the Retriever
body axis, to prevent breakage from bending stresses.
WARNING
It is imperative that the following safety warnings are taken into important
consideration before and during use of Retrieval Equipment. Failure to
follow these warnings could result in serious injury or death.