CORVUS TERRAIN DX4 CAB, Руководство по ремонту

Страница: 48 / 136

48
Page
WORKSHOP
MANUAL
We reserve the right to modify the product and the design.
4WD LOCKING SYSTEM OIL (CHECK)
To check the front differential oil level, you have to drain the
oil into a calibrated container and measure the amount that has
been extracted. The correct volume is 0.05 L.
4WD LOCKING SYSTEM OIL (CHANGE)
It is convenient to frequently check that there are no leaks and the
maintenance of the oil level, for correct operation.
Changing the locking system oil.
1. Put the vehicle in the horizontal position and remove the front
underbody protector (see page 41).
2. Place a container under the 4WD locking system to collect the
used oil and avoid any spillage.
3. Remove the filler plug (1), to facilitate a better drainage of the 4WD
oil.
4. Remove the drain screw (2) the 4WD locking system oil.
5. Once all the oil has drained out, replace the washer and make
sure the drain screw (2) is tightened at 24 Nm.
6. Fill with 0.05 L of new oil.
7. Replace the plug washer and tighten the oil filler plug
(1) at 24 Nm.
TECHNICAL INFORMATION:
Recommended oil: SAE 80W-90, API GL5
Capacity: 0.05 L
Tighten the filler plug/screw to 24 Nm.
Tighten the drain plug/screw to 24 Nm.
2
1
2
1
MAINTENANCE