Fig. 3
XM module
4.
Connect 16-pin factory plug (removed from XM module) to 16-pin
socket on installation harness (See
Fig. 4)
Fig. 4
harness 16-pin socket
5.
Connect installation harness 16-pin plug into XM module 16-pin socket
(See
Fig. 2
)
6.
Route cable/module towards front of the car or where module (See
Fig. 6
) will reside. We recommend under passenger seat, armrest or
console between seats
—
your choice.
If you opted to retain XM playback, skip to step 8, but if XM subscription has
expired, an aux input jack is provided to which you may connect and play an
aux device (Mp3 player, iPod etc.) on the car system. (
Required XM module
remains connected
)
Noteworthy:
With the C6-HF, C6 owners may retain XM subscription opt
for an Aux input (one or the other; not both)
7.
Connect included 3.5mm male-male cable (See
Fig. 5
to module input
jack labeled
“AUX” (See
Fig. 6
), and route other end to front of dash or
where aux device will reside (within 3 ft.)
Fig. 5
audio cable
Fig. 6
module
8.
Route red accessory wire to fuse panel under passenger floor board
and crimp included Add-A-Fuse circuit (See
Fig. 7
).
9.
Locate an accessory fuse (see suggestions below) for the Add-A-Fuse
circuit.
Accessory supply voltage ensures module
turns “ON”
and
available only when vehicle is in operation.
