Corvalent Q35SBC, Руководство пользователя, Страница: 36 / 61

► Remote Access Configuration
Set the value for this option to serial to allow the system to use the remote access feature. The
remote access feature requires a dedicated serial port connection.
Remote Acess Configuration
Enabled or Disabled
Serial Port Number
Select the serial port you want to use for console
redirection. You can set the value for this option to either
COM1 or COM2
Serial Port Mode
Select the baud rate you want the serial port to use for
console redirection.
Flow Control
Select Flow Control for console redirection Available
options are None, Hardware and Software.
Redirection after BIOS POST
[Disable] Turn off the redirection after POST
[Boot Loader] Redirection is active during Boot loader
[Always] Redirection is always active (some OS’s may not work if set
to always)
Terminal Type
ANSI, VT100 or VT-UTF8
UT-UTF8 Combo Key Support
Enables or Disables UT-UTF8 Support
Sredir Memory Display Delay
Delay in seconds to display memory information
► USB Configuration
Legacy USB Support
Auto,
Enable
and Disable
Disabled Set this value to prevent the use of any USB device in DOS or
during system boot.
Enabled Set this value to allow the use of USB devices during boot and
while using DOS
Auto This option auto detects USB Keyboards or Mice and USB devices
to allow them to be utilized during boot and while using DOS.
USB2.0 Controller mode
Hi-speed or
Full-speed
BIOS EHCI Hand-off Enable
or Disable
36