Corvalent H61SB Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 70

Corvalent H61SB Скачать руководство пользователя страница 36

36

Be  sure  that  there  is  sufficient  air  circulation  across  the  processor’s  heat  sink,  and
CPU  cooling  FAN  is  working  correctly;  otherwise,  it  may  cause  the  processor  and
motherboard  to  overheat  and  damage.  You  may  install  an  auxiliary  cooling  FAN,  if
necessary.

Installing HEAT SINK/FAN

The processors supported by the H61SB require the use of a heat sink/fan. Make sure to install it
properly, to avoid overheating. Recommended heat sink/fans require a screwdriver to attach it to a
metal bracket installed underneath (solder side) of the board.

Installing FAN(s)

The CPUFAN header can control fans up to 0.75A, while the SYSFAN headers support fans of up to
1.,5A, and can be configured for 3-pin or 4-pin operation. Connect the fan’s plug to CPUFAN and/or
SYSFAN, taking into consideration the polarity of connector.

3 pin FAN(s) will not be controllable when connected to the 4 pin CPUFAN header and will be on at
full speed. Connect the fan’s plug to the board observing the polarity of the connector.



Installing Power Cables

The H61SB is powered through the PICMG back-plane, but also requires connecting the 2x2
ATX12V.

«
...
34
35
36
37
38
...
»

Содержание H61SB







































































Отзывы:

Нет отзывов