background image

 

18

V. EXERCISE GUIDE

PLEASE NOTE:

Before beginning any exercise program, consult your physician. This is important especially if you are 
over the age of 45 or individuals with pre-existing health problems.

The pulse sensors are not medical devices. Various factors, including the user’s movement, may 
affect the accuracy of heart rate readings. The pulse sensors are intended only as an exercise aid in 
determining heart rate trends in general.

Exercising is great way to control your weight, improving your fitness and reduce the effect of aging and 
stress. The key to success is to make exercise a regular and enjoyable part of your everyday life.

The condition of your heart and lungs and how efficient they are in delivering oxygen via your blood to 
your muscles is an important factor to your fitness. Your muscles use this oxygen to provide enough 
energy for daily activity. This is called aerobic activity. When you are fit, your heart will not have to work 
so hard. It will pump a lot fewer times per minute, reducing the wear and tear of your heart.

So as you can see, the fitter you are, the healthier and greater you will feel.

WARM UP

Start each workout with 5 to 10 minutes of stretching and some light exercises. A proper warm-up 
increases your body temperature, heart rate and circulation in preparation for exercise. Ease into your 
exercise.

After warming up, increase the intensity to your desired exercise program. Be sure to maintain your 
intensity for maximum performance. Breathe regularly and deeply as you exercise.

|  EXERCISE GUIDE

Содержание SM20

























Отзывы: