Cortex Omega SDT-10, Руководство пользователя

Страница: 8 / 10

- 7 -
Step 2
1. Install the Cable (61) in the direction of arrow as shown in below drawing. When you install to
the marked circle position, Cable (61) must through small hole on bottom left corner of Front
shroud (55).
2. Lock Pulley 2 (69) and Alloy sleeve (48) to weight frame (1) with Hexagon socket head screw
(19), Flat washer (33), Nylon nut (36).
Step 3
1. Install Cushion (66), Guide rod (49), Weight block (47) and Guide block (43) to Weight frame (1)
in order.
2. Fix Guide rod (49) to Weight frame (1) with E Circlip (40).
3. Paste sticker on Weight block (47) and Guide block (43), as order of small to big and top to
bottom.
4. Insert Selector pin with wire (50) to Weight block (47) and Selector rod (42), and then insert the
ring of Selector pin with wire (50) to screw of Cable (61). Finally lock the screw of Cable (61) to
Selector rod (42) tightly.