Setup Guide
Parts Diagram and Functions
Front Panel
(continued)
11.
NAVIGATOR keypad
These buttons allow the user to navigate through menus and features of
the HDC-1000. Depending on the mode of the unit, the buttons may
serve different purposes.
12.
SHIFT button
Holding down the SHIFT button extends the use of certain buttons on the
unit, by providing alternate functions.
13.
JOG WHEEL
The JOG WHEEL controls many aspects of the unit, and can be used for
navigating through menus, searching through music and manipulation of
pitch. The behavior of the JOG WHEEL is dependent on the mode of
operation, as well as the status of the PITCH ON/OFF indicator and
JOG MODE.
14.
POWER button
The POWER button can be pressed momentarily to turn ON the unit; to
turn off the unit, the POWER button must be held down for 5 seconds.
Holding the SHIFT button while pressing POWER will display an addi-
tional menu, which allows for the changing and removal of USB devices,
as well as setup options relating to the HDC-1000.
15.
SINGLE button
When this button is pressed momentarily, the state of playback (SIN-
GLE or CONTINUE) will be displayed on each side’s respective LCD
DISPLAY. To change the state of playback, hold the SHIFT button on the
side of the unit you wish to change, and press the SINGLE button
momentarily. The new state of playback (SINGLE or CONTINUE) will
then be displayed on that side’s respective LCD DISPLAY panel.
16.
TIME MODE button
This button dictates whether the unit will display textual and visual time
information relating to the TIME REMAINING or TIME ELAPSED.
Pressing this button momentarily changes the TIME MODE of both sides
of the unit, while holding SHIFT and momentarily pressing TIME will
change the TIME MODE of only that respective side.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
9
