V150921
Touch-Panel Cont Reader
Networking & Stand-alone
Command List
Mode
M4/M6/M8
M4/M6/M8
M4/M6/M8
M4/M8
M4/M8
M4/M8
M4/M6M8
M4/M6/M8
M4/M6/M8
M4/M6/M8
M4/M6/M8
M4/M8
M4/M6/M8
M4/M6/M8
M4/M6/M8
M6
M4/M8
M4/M8
M4/M8
M4/M6/M8
M4/M6/M8
M4/M8
M4/M6/M8
M4/M6/M8
M4/M8
M4/M6/M8
M4/M8
M6
Function
Entering programming mode
Exiting programming mode
Exiting programming mode and enabling arming status
Node ID setting
(Connecting to ACC1000,or total unit is < 254)
Node ID setting
(Connecting to PC directly without via ACC1000 and > 254)
Mifare tag / card format
(Optional)
Door relay time setting
Alarm relay time setting
Control mode setting
Arming delay time setting
Alarm delay time sett
Master card setting
Auto-open zone setting
Master code setting
Suspend or delete tag
Recover tag
Setting up a batch of user to access
by card only
(M6 only)
Setting up the PWD/PIN
(Access mode: Card or PIN)
Setting up the PWD/PIN
(Access mode: Card and PIN)
Arming output time setting
M4/M8: Duress code setting
M6: Public PIN setting
(Card or PIN)
Card number modification
M4/M8: Arming PWD setting
M6: Public PIN setting
(Card and PIN)
Door close time
Adding tag
Factory setting-1
(Function default value)
Lift control setting: multi-doors
Add/Delete tag by RF
(M6 only)
Description
PPPPPP=Master Code, default value=
123456
NNN=Node ID
Node ID: 001~254
NNN=Node ID of ACC980, VVV=Virtual ACC1000 Node ID,
nnn=Door number
N: 0=ISO14443A;
1=ISO014443B; 2=ISO156896;
3=I Code1; 4=I Code2
PS.1. Please select the compliance,firstly.
2. Make sure reader and card using the same compliance.
TTT=Door relay time
000=Normal open
001~600=1~600 sec.; 601~609=0.1~0.9 sec.
TTT=Alarm relay time
001~600=1~600 sec.
N=Mode
4=Mode4
；
6=Mode6
；
8=Mode8
TTT=Arming delay time
001~600=1~600 sec.
TTT=Alarm delay time
001~600=1~600 sec.
SSSSS-EEEEE=00000-01023;
SSSSS=Starting user address; EEEEE=Ending user address
N: 2 sets of auto-open zone (0: 1st set; 1: 2nd set)
HHMMhhmm=Staring time to ending time
(i.e.: 08301200=08:30 to 12:00)
FFFFFFF= 7 days of week (Sat/Fri/Thu/Wed/Tue/Mon/Sun)
(F= 0: disable; 1: enable)
PPPPPP=New master code
RRRRRR=Repeat the new master code
=Suspend =Delete;
SSSSS=Starting user address, EEEEE=Ending user address
SSSSS=Starting user address
EEEEE=Ending user address
SSSSS=Starting user address
EEEEE=Ending user address
Access mode:
Card or PIN
; UUUUU=user address;
PPPP=4-digit individual PWD
Access mode:
Card and PIN
; UUUUU=user address;
PPPP=4-digit individual PWD
TTT=Arming output time; 001~250=1~250 sec.
PPPP=4-digit individual PWD (default value=
4321
)
P.S. Duress code will be unavailable and become a public PIN at access mode “
Card or PIN
” of
M6
UUUUU= User address; SSSSS=5-digit site code;
CCCCC=5-digit card code
PPPP=4-digit individual PWD( default value=
1234
; disable Arming PWD=
0000
)
P.S. Arming PWD code will be unavailable and become a public PIN at access mode “
Card PIN
” and of
M6
TTT=Door close time: 001~600=1~600 sec.; default value: 15 sec.
UUUUU=User address;
QQQQQ=Pieces of card(
00001
=Continuous sensing)
Please refer to function default value for details.
UUUUU=User address, S=4 sets of lift control; FFFFFFFF=8 floors/stop setting
(F=0: Disable, 1: Enable)
N=0/Delete tag; N=1/Add tag
9
Diagram
Alarm for Tamper Switch
Magnetic Door Contacts
Magnet Lock
(Bolt Lock)
Push Button
Strike Lock
Red
Orange
N.O.
CO
M
B-
A+
WG
1
WG
0
BZ
G-LE
D
R-LE
D
N.C.
N.C.
CO
M
D
oor
SEN
PB
AL
M
V+
V-
ACC1000
RS232/RS-485
or USB/RS-485
Converter
WG Reader
V-
V-
+12V
+12V
N.O.
12V
CTL
�
COM
N.O.
N.C.
12V
CTL
�
COM
N.O.
N.C.
N.C.
Thick
Black
Thick
Re
d
Grey
Purple
Orange
Whit
e
Purple
White
Blue
Whit
e
ACC980 to PC
ACC980 to ACC1000
Command
PPPPPP
00 NNN
00 NNN VVV nnn
01 N
02 TTT
03 TTT
04 N
05 TTT
06 TTT
07 SSSSS EEEEE
08 N HHMMhhmm FFFFFFF
09 PPPPPPRRRRRR
10 SSSSS EEEEE
10 SSSSS EEEEE
11 SSSSS EEEEE
11 SSSSS EEEEE
12 UUUUU PPPP
13 UUUUU PPPP
14 TTT
15 PPPP
16 UUUUU SSSSSCCCCC
17 PPPP
18 TTT
19 UUUUU QQQQQ
20 DDD
21 UUUUU S FFFFFFFF
22 N
9
