c. Reviewing a number - Must be done on-hook.
i. Press
The first directory entry will be shown.
ii. Press
to see the other entries.
iii. It is also possible to review a particular record by pressing
the sequence number and then #. For example, to review
the seventh number, press 7#.
iv. If the number is more than 13 digits an arrow will show on
the display. Press
to see the rest of the number.
d. Dialing a Number
i. Press
The first directory entry will be shown.
ii. Press
until the desired entry is shown.
iii. Go off hook (lift the handset, press
or press
). The number will be dialed.
e. Storing a Caller ID Record.
i. While on-hook, press
until the desired number is
displayed.
ii. Press and hold
until the last digit begins to flash.
iii. Press
two times.
iv. Use
to select the ring cadence for this number.
v. Press
Display shows SAVE OK.
vi. Press
two times.
f. Storing a dialed number. Any of the last 15 dialed numbers may
be stored into the directory.
i. Press
ii. Press
until the desired entry is shown.
iii. Press and hold
until the last digit begins to flash.
iv. Press
two times.
v. Use
to select the ring cadence for this number.
vi. Press
Display shows SAVE OK.
vii. Press
two times.
DIRECTORY.
DIRECTORY.
SPEAKER,
HEADSET
DIRECTORY
DIAL/OK
DIAL/OK.
DIAL/OK
REDIAL.
DIRECTORY
DIAL/OK
DIAL/OK.
DIAL/OK
or
or
or
or
or
or
or
s
t
s
t
s
t
s
t
s
t
s
t
s
t
10
15
k. Enter the number of 3 second pauses to be inserted between
dialing the voice mail number and the PIN. For example, if you
enter 2 here, the phone will pause 6 seconds.
l. Press
.
m. Lift the handset to end programming.
- The 1210 can respond to Stutter Dial Tone Message
Waiting. If this is set to ON, the phone will go off hook briefly after
every call to check the dial tone. If it is stuttered, the message lamp
will be lit. To select this feature, press
and then use
to
toggle between OFF and ON. Press
to confirm.
- The 1210 has two hold modes: NORMAL and PBX.
In Normal mode, the
button will place the phone on local
hold. This call can be retrieved from any phone connected to the
line. In PBX mode, the
button can be programmed to dial a
code to place the call on PBX hold. Please note there is no hold
indication in PBX mode. To select this feature, press
and then
use
to toggle between NORMAL and PBX. Press
to
confirm.
- This is a number that is dialed to access an
outside line when the phone is used behind a PBX.
a. Press
b. Dial the access code (up to 4 digits).
c. Press
to confirm.
d. Press
to continue with programming.
- This selects the format used to display the date.
To select this feature, press
and then use
to toggle
between MM-DD (Month-Day) and DD-MM (Day-Month). Press
to confirm.
- This selects the format used to display the time.
To select this feature, press
and then use
to toggle
DIAL/OK
OK
OK
HOLD
HOLD
OK
OK
OK.
OK
OK
OK
OK
6. Set SDT
7. Hold Mode
8. Set Access Code
9. Date Format
10. Hour Format
or
or
or
or
or
s
t
s
t
s
t
s
t
s
t
Содержание 121000TP227S
Страница 1: ...121000TP227S USER S MANUAL ...
