This switch is located on the bottom of the telephone. For Tone Dialing, set
the switch to the T position. For Pulse Dialing, set the switch to the P position.
This feature allows you to redial the last phone number dialed.
You can adjust the flash time by using this switch located on the bottom of
your phone. There are 3 levels available,
,
and
(ms).
There are 3 ringer levels (
,
, and
). These may be selected by this
switch on the bottom of the telephone.
1. Dial mode switch
Redial function
3. Mute function
4. Flash button
Flash time switch
6. Ringer volume switch
100 300
600
HI LO
OFF
2.
5.
a. Lift handset.
b. Press
.
REDIAL
This feature allows you to turn off your telephone's microphone so that the
other party cannot hear you.
Press FLASH instead of pressing the hook switch to activate services such as
Call Waiting or 3-Way Calling, or to activate certain PBX or Centrex features.
You may be required to press other buttons before or after you press
.
Refer to the custom calling instructions provided by your local telephone
company or to the operating instructions provided with your PBX.
FLASH
3
OPERATIONS
2
Press the
or
buttons to adjust the receive volume during a
conversation. There are 4 levels. This button controls both the speaker and
handset receive levels.
There are 12 memory locations (
,
and
) .
1. Lift the handset.
2. Press
.
3. Dial the number to be stored (Press
to insert a pause).
4. Press
.
5. Press the desired Memory Button.
1. Lift the handset.
2. Press the desired Memory Button.
1.
2.
3.
4.
5.
7. Speaker button
9. One-touch memory
10. Two-touch memory
VOL.+
VOL.-
M1~M10 VIP1
VIP2
A. To store a number to memory
SET
PAUSE
SET
B.
A. To store a number to memory
Use this button to activate the Speakerphone.
Turn on: Press the
button. Hang up the handset if you are off hook.
Turn off: To end a call, press the
button. To continue a call, lift the
handset.
A.
B.
8. Volume setting
To dial a number stored in memory
There are 10 two-touch memory locations.
Lift the handset.
Press
.
Dial the number to be stored (Press
to insert a pause).
Press
.
Press the desired Memory Button (
).
SET
PAUSE
SET
0~9
4
